Monday, September 13, 2021

Give Your system a Boost with Goulds and Grundfos Booster Pumps.

In simple terms, a water booster pump is a device that increases the volume and pressure of water flowing from your showerhead or faucet. After all, who likes low water pressure? Showering under a trickle of water is a nuisance. No one wants low water pressure for performing simple tasks like brushing your teeth or bathing. So, if your bathroom has low water pressure, you can use a booster pump to get rid of the nightmare. Read on to learn how you can give your water system a boost with Goulds booster pumps and Grundfos booster pumps:

Goulds LB Series

The centrifugal Goulds Booster pumps from the Goulds LB Series have been designed to be used in the high head liquid transfer systems. With these booster packages, you will have a flow rate of about 18 gallons per minute. Let’s learn about the features of the Goulds LB Booster Pumps:

·         LB is a single-stage and centrifugal jet pump that can boost your flow to about 18 GPM.

·         The built of the pump is of stainless-steel construction with centerline connections, NPT threaded, prime and drain connections that come with stainless steel plugs, and an easily accessible vent.

·         The motor adapter, guidevane, and impeller and made using lightweight and high strength engineered composite.

·         The mechanical seal used in this booster pump is the standard John Crane type 6 seal that comes with EPR elastomers, stainless steel metal parts, and carbon-ceramic faces.

This water booster can be used for potable water boosting and reverse osmosis systems. Please note that this pump is not to be used with liquids that contain acids, petroleum/hydrocarbons, or detergents/caustics.

Here are a few of the Goulds booster pumps from the Goulds LB Series:

Goulds LB0512 Centrifugal Booster Pump

The LB0512 Centrifugal Booster Pump is a single-stage centrifugal jet pump designed for high head general liquid transfer service and booster applications with flow requirements up to 18 GPM. The pump end is built with a stainless-steel stamped casing. Here are some features:

·         ½ HP

·         Single Phase

·         115-230 Volt and 60 Hz

·         3500 RPM

·         ODP - Open Drip Proof Motor Enclosure

·         Noryl 4.5" Impeller

·         1" NPT Discharge

·         1 1/4" NPT Suction

 

Goulds LB0512, Centrifugal Booster Pump

Goulds LB0712 Centrifugal Booster Pump

The LB0712 Centrifugal Booster Pump is a single-stage centrifugal jet pump designed for high head general liquid transfer service and booster applications with flow requirements up to 18 GPM. The pump end is built with a stainless-steel stamped casing.

·         ¾ HP

·         1 Phase

·         115-230 Volts

·         1-1/4" NPT Suction

·         Stainless Steel Pump End Casing

·         176 ft Max Head

·         5" Impeller

·         1" NPT Discharge

·         ODP

·         18 GPM Max

Goulds LB0712, Centrifugal Booster Pump



 

Grundfos CMBE Series

Grundfos CMBE Series Booster pumps have been designed for domestic as well as commercial application settings like general pressure boosting, irrigation, raw-water supply, and dewatering. It is one of the best options to have a constant fresh water supply to your garden or home. The system package consists of a CME pump with a thermal-protected MLE motor, an integrated frequency converter, a pressure gauge, an expansion tank, a sensor, and an integrated speed controller. Take a look at the features of the Grundfos CMBE Series:

·         Thanks to the integrated speed controller, CME Booster can have constant pressure inside the pipe system.

·         The pressure sensor monitors the water consumption changes and signals the speed controller to adapt performance by changing the motor speed.

·         The MLE motor provides thermal protection against blocking and slow overloading, so there is no need for external motor protection.

·         The boosters can be used to pump thin, clean, non-explosive, and non-aggressive liquids that don’t have any fibers or solid particles.

This pump works best for:

             i) tap or drinking water

             ii) condensate and rainwater

             iii) river and lake water

             iv) groundwater

             v) chlorinated water

             vi) softened water

             vii) district heating water and boiler feed water.

Now take a look at some of the Grundfos booster pumps from the Grundfos CMBE series:

Grundfos 98548109 CMBE 1-44 Booster Pump System

This Grundfos 98548109 compact booster system is very easy to install. No external motor protection is required since the MLE motor incorporates thermal protection against slow overloading and blocking. Here are some of the features:

·         1-44 - 1.5 HP Booster Pump (200-240V)

·         1.5 HP MGE frequency-controlled Permanent-Magnet Motor (200-240V)

·         Rated 8.8 GPM @ 85' Head

·         Integrated Speed Controller

·         Grundfos Eye Control Panel

·         Dry-Running Protection

·         Stainless Steel Pump Housing & Impeller

·         Quiet Operation

·         1" Inch Inlet & Outlet

Grundfos 98548109 CMBE 1-44 Booster Pump System


 

Grundfos 98810910 CMBE 1-44 Booster Pump System

This Grundfos 98810910 booster is very easy to install and designed for domestic and commercial purposes. The integrated speed controller enables the CME Booster to keep constant pressure in the pipe system. When the pipework has been put in, it is all a matter of plugging the unit into a socket, and the system is operational. The pump system’s features are:

·         1-44 - 1 HP Booster Pump (115V)

·         1 HP MGE Frequency-Controlled Permanent-Magnet Motor (115V)

·         Rated 8.8 GPM @ 85' Head

·         Integrated Speed Controller

·         5-Foot Power Cord w/ 3-Prong Plug (NEMA 5-15)

·         Grundfos Eye Control Panel

·         Dry-Running Protection

·         Stainless Steel Pump Housing & Impeller

·         Quiet Operation

Grundfos 98810910 CMBE 1-44 Booster Pump System


 

Grundfos is among the leading water technology companies in the world. They are committed to developing solutions that solve the issues of water and climate challenges while improving people’s quality of life.

Goulds Pumps is one of the most well-respected and widely recognized brands in the field of pumps. They are the only manufacturer that has made digital monitoring standards on all of their process pumps.

PumpProducts.com is a master stocking distributor for pumps, electric motors, and pump motors throughout the country. We have years of experience working with motors, pumps, and replacement parts in the United States. Currently, we ship products to all addresses in the United States.

No comments:

Post a Comment